How to Effectively Use a Plumbing Snake in Your Home
When it comes to plumbing issues, clogs and blockages are some of the most common problems homeowners face. They can be frustrating and disrupt your daily routine. However, instead of immediately calling a plumber, there is a simple tool that you can use to tackle these issues yourself – a plumbing snake. In this blog post, we will discuss how to effectively use a plumbing snake in your home, so you can save time and money by handling minor plumbing problems on your own. You will realize that one of the most effective ways to address this issue on your own is through the use of a plumbing drain snake.
Choose the Right Snake for Your Plumbing System
The first step is to choose the right snake for your plumbing system. There are two types of plumbing snakes – hand-held and power auger. A hand-held snake is suitable for small blockages in a sink or toilet, while a power auger can handle bigger clogs in main sewer lines. Once you know what type of snake you need, you can buy or rent one from a hardware store.
Prepare Your Plumbing System
Before you start snaking, you need to prepare your plumbing system. Turn off the water supply and remove any drain covers or stoppers. It’s also a good idea to wear gloves and eye protection to avoid any mess or debris.
Insert the Snake
Now it’s time to insert the snake. For hand-held snakes, feed the snake slowly into the drain until you feel resistance. Then, crank the handle clockwise to snag and pull out the blockage. Power augers, on the other hand, require more force and can be difficult to operate. After inserting the auger, you need to turn on the motor and move the snake back and forth to clear the blockage.
Repeat if Necessary
If the blockage isn’t cleared after the first attempt, repeat the process until the snake can pass through smoothly. If you still can’t clear the blockage, it’s best to call a professional plumber.
Clean and Reassemble
After clearing the blockage, it’s important to clean and reassemble your plumbing system. This includes running hot water down the drain for a few minutes to make sure any remaining debris is flushed out. Make sure the water is now passing through the drain easily to ensure that any residual blockage has been flushed out. If the problem persists attempt to repeat the process or instead enlist the work of a professional plumber.
Using a plumbing snake is a simple and effective way to tackle clogs and blockages in your plumbing system. By choosing the right snake for your plumbing system, preparing the area, inserting the snake properly, and repeating the process until the blockage is cleared, you can save money and time by fixing the problem on your own. Remember to always wear protective gear and follow safety precautions when handling plumbing issues. In case of major blockages, it’s always best to call a qualified plumber to save the day.
https://www.plumbersthornton.com/
When it comes to plumbing issues, clogs and blockages are some of the most common problems homeowners face. They can be frustrating and disrupt your daily routine. However, instead of immediately calling a plumber, there is a simple tool that you can use to tackle these issues yourself – a plumbing snake. In this blog…